Mağaza
A.1 Laminated Safety Glass (Multi-Layer)
$0.00The laminate glass utilized in sloped, overhead, and other applications presents numerous design and safety challenges. If the glass breaks, the glazing system must protect against the falling glass. Additionally, an understanding of the unique thermal, solar, and ultraviolet characteristics of sloped and overhead glazing is required to avoid occupant discomfort and poor energy efficiency, and reduce potential damage to household furnishings. This Product Application Note is intended to provide an overview of the range of options that exist to incorporate laminated glass in overhead and sloped applications.
A.2 Tempered Glass
$0.00Fully tempered glass is a safety glass, generally four times stronger than the same thickness of ordinary annealed glass. Taking ordinary glass to a tempered state involves heating the glass in a special furnace to approximately 1260° Fahrenheit, then setting a permanent tension between the glass “core” and surfaces by rapidly cooling the glass in a high-pressure quench.. When fully tempered glass is broken, the release of tension between these surfaces initiates a cascade of much smaller glass fragments than ordinary annealed glass. While a person can still get cut by this safety glass, the objective is to eliminate as much of the dangerously long shards of glass raining down within the broken debris as possible.
A.4 Insulating Glass
$0.00To reduce heat, gain, or loss through the glass, two or more lines of glass are used to create dead air space that inhibits the transmission of heat and cold between the lines of glass. Insulated glass is typically fabricated using very special sealants and a metal spacer at the perimeter of the glass- creating a hermetically sealed insulated glass (IG) unit. Glass used in IG units can be annealed, heat-strengthened or fully tempered.
A.5 Decorative Glass
$0.00IGP decorative glass products to satisfy a wide range of applications. Light frit colors and certain pattern designs can cause enhanced brightness when viewed from indoors under certain daylight and background sky conditions, while dark fruit colors will tend to reduce glare. Applications include transparent and translucent glass for interior applications, including glass doors, partitions, handrails, glass ceilings, bathrooms, elevator walls, shower enclosures, court walls for racket sports and sneeze guards for food service.
A.6. Electrical Heating Glass
$0.00Electrical Heating Glass is a heatable laminated glass that can be applied either on windscreens or backlights or even in the most extreme conditions, allowing a clear and undistorted vision. The main difference regarding ordinary laminated glazing consists of almost invisible heatable microwire filaments embedded in the PVB interlayer film. An electrical current is then passed through these microwires to achieve the mist and ice-free effect.
Conex
$0.00Features: anti-theft, sound insulation, rust resistant, dust resistant, corrosion resistant, toilet, cabinet installation, sink installation, water heater installation, door and window protection, installation Ventilation installation, Roof skylight, Washable walls, Telephone wiring, Sturdy folding base (stairs), Persian toilet, Equipping wheels with automatic brakes
Support and after-sales service: parts supply and repair, product replacement and repair, transportation, installation
Crisis Prefabricated Houses (Expandable Shelter 3×1)
$0.00Applications
Field hospitals: operating room, radiography, laboratory, etc. Field Clinic. Commander post. Controlling room and monitoring room. Meeting room, prayer room, situation room.
PARS ATRAK VIDJEH- Industrial Oil
$0.00PARS ATRAK VIDJEH oil is a highly stable oil-in-water emulsion developed for use as a cost effective metalworking fluid. It is formulated with suitable base oils, good additives and emulsifiers to provide in a variety of metalworking fields.
Applications
- Machinery operation
- Drilling
- Sawing
- Grinding
Performance Features
- Very good lubricity
- Excellent emulsion stability
- Without unpleasant odor
- Rust and corrosion resistance
- Excellent cooling properties
- Contains biocide
Performance Levels
- ISO – L- MAA
- ISIRI 2773
PARS BABAK VIDJEH Industrial Oil
$0.00PARS BABAK VIDJEH is an advanced performance anti wear hydraulic oil, based on a blend of specially selected base oils and unique additives technology. PARS BABAK VIDJEH, range of hydraulic oils enables you to match the oil life to your operational needs.
Applications
- Hydraulic and fluid power transmission systems
- Closed gear boxes
- All applications that need R&O oils
Performance Features
- High oxidation resistance
- Excellent thermal stability
- Outstanding anti wear performance
PARS BABAK- Industrial Oil
$0.00PARS BABAK oil is a premium quality, solvent refined for a wide range of industrial applications. PARS BABAK oil is suitable to use in hydraulic and circulating systems, also is proposed to wherever a R & O oil is recommended.
Applications
- Closed gear boxes
- Some kinds of compressors crankcase
- Anti-friction bearing
- Textile machineries
Performance Features
- High thermal stability
- Very good oxidation resistance
- Very good outstanding anti wear performance
- Excellent air release and anti-foam properties
- Good water separation
PARS COMPRESSOR 1053- Industrial Oil
$0.00PARS COMPRESSOR 1053 oil is a premium quality vane and screw air compressor lubricant. It is based on a blend of specially HVI base oils and additives to provide a long life service anti friction, anti – corrosion and anti oxidation performance.
Applications
- Used for all types of screw & vane compressors
Performance Features
- Long service life
- Excellent VI
- Very good rust resistance
- High oxidation stability
PARS COMPRESSOR Industrial Oil
$0.00PARS COMPRESSOR oil is a premium quality lubricant for rotary sliding vane and screw air compressors. It is based on a blend of selected solvent refined base oil and carefully chosen additives.
Applications
Rotary sliding and vane screw air compressors
Screw air compressors
Reciprocating compressors
Performance Features
Excellent rust resistance
Very good oxidation stability
High anti foam resistance
Excellent outstanding wear and corrosion protection
Very good water separation
PARS ENTEGHAL HARARAT- Industrial Oil
$0.00PARS ENTEGHAL HARARAT oil is high performance product for use in closed indirect heating installations. It is formulated from highly refined base oils that is resistant to thermal cracking and chemical oxidation.
Applications
- Closed systems that the bulk oil temperature ranges are up to 300 oC
Performance Features
- Excellent thermal stability
- Excellent oxidation resistance
- High temperature conductivity coefficient
Performance Levels
- ISO 6743 PART 12, QB
- ISIRI 11298-12QB
PARS FLUSHING-Industrial Oil
$0.00PARS FLUSHING oil is a very low sulphur content, non-detergent industrial flushing oil that is suitable for flushing, removal of light hydrocarbon based industrial fluid systems.
Applications
- Suitable for use in hydraulic, turbine or heat transfer system requiring cleaning and fluid extraction before recharge.
Performance Features
- Low viscosity
- Good compatibility with most hydraulic, turbine or heat transfer systems materials
PARS HYDRAULIC AUTOMATIC Industrial Oil
$0.00PARS HYDRAULIC AUTOMATIC oil is an advanced performance hydraulic oil designed to meet challenges. PARS HYDRAULIC AUTOMATIC oil is formulated from high quality base oils and shear stable viscosity index improver to enhance and maintain excellent viscosity characteristics.
Applications
- Certain critical hydraulic systems
- Furnaces hydraulic systems
- Marine hydraulic systems
- Bearings working in high temperature
Performance Features
- Low viscosity variation with temperature
- High shear stability
- Excellent filterability
- Good oxidation resistance
PARS HYDRAULIC ZF- Industrial Oil
$0.00PARS HYDRAULIC ZF (zinc-free) is a high performance lubricant that uses exclusive zinc-free technology to provide outstanding corrosion protection properties. It is formulated from high quality base oils and special ashless (zinc free) additives.
Applications
- Static hydraulic applications
- Industrial hydraulic system where HLP performance with zinc free properties is required
- Severe duty hydraulic service
- Marine hydraulic systems
Performance Features
- Superior cleanliness and filterability
- Excellent long fluid life maintenance saving
- Premium outstanding wear protection
PARS KEYVAN-Industrial Oil
$0.00PARS KEYVAN oil is blended from high quality mineral base oils and suitable additive to use in bearings and circulating systems.
Applications
- Circulating systems
- Closed gear boxes operating under light to heavy loads
- Control systems made from steel bronze or silver alloys
Performance Features
- Very good oxidation and thermal stability
- Excellent rust resistance
- Very good demulsibility
PARS NISSAN Industrial Oil
$0.00PARS NISSAN oil is high quality extreme pressure oil designed for heavy duty industrial enclosed gears. It is made from high quality mineral base oils and unique additives.
Applications
- Steel gear transmission
- Industrial gear drives where full EP performance is required
- Bearings and other components in circulating and splash lubricated systems
Performance Features
- High thermal stability
- Very good oxidation resistance
- Excellent water separation
- Excellent load carrying capacity
- Excellent wear and corrosion protection
PARS NISSAN PAG Industrial Oil
$0.00PARS NISSAN PAG oil is an advanced synthetic heavy duty industrial worm drives gear oil formulated by using specially selected polyalkylene glycol base fluid and additives. It offers outstanding lubrication performance under severe operating conditions, including improved energy efficiency, long service life and high resistance to micro-pitting.
Applications
- Enclosed industrial worm gear systems
- Extended life systems
- Suitable for lubrication of bearings, splash lubricated systems
- Recommended for highly loaded spur and helical gears
Performance Features
- Excellent oxidation and thermal stability
- High resistance to micro-pitting and excellent wear protection
- Maintaining system efficiency
- Very good resistance to corrosion and rusting
- Immiscible with mineral base oil
PARS NISSAN S-Industrial Oil
$0.00PARS NISSAN S is an advanced synthetic heavy duty industrial gear oil (based on PAO) offering outstanding lubrication performance under severe operating condition including reduced friction, long service life and high resistance to micro-pitting for optimal gear protection.
Applications
- Enclosed industrial gear
- Wind turbines gear boxes
- Helical and hypoid gears under high load and very low or elevated temperatures and wide range of temperature variations
- Suitable for lubrication of bearings and other components in circulating and splash- lubricated systems
Performance Features
- Outstanding resistance to breakdown over long duration and high temperature operation
- Reduced tooth wear due to excellent load carrying capacity
- Very good corrosion protection
- Very good water separation